Chuck & Accesories
Chucks & Accessories for Enhanced Machining Precision
- Robust Chucks: Engineered for high clamping force, ensuring stability and accuracy in all machining operations.
- Wide Range: Available in various sizes and styles to suit different machining needs, including hydraulic, pneumatic, and manual options.
- Precision Accessories: Includes jaws, collets, and adapters designed for exact alignment and secure holding.
- Durability: Constructed from premium materials for wear resistance and long-term reliability.
- Easy Installation: Simple setup and compatibility with most CNC and VMC machines for a hassle-free upgrade.
-
Vendor:Midland Tools
BT-30 ER COLLET CHUCK
BT30 Tool Holder rages from ER-11 to ER-40 with varying length. The thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical...- From Rs. 1,250.00
- From Rs. 1,250.00
- Unit price
- per
-
Vendor:Midland Tools
ER NUT SPARES A / M / UM
Made from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER16A Has an id thread of – M22*1.5PER16A Outside diameter is 28 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER16A HEX TYPE NUT ER16M Collet Nut has an id thread...- From Rs. 205.00
- From Rs. 205.00
- Unit price
- per
-
Vendor:Midland Tools
Collet ER 32
DESCRIPTION ER32 Collet follows DIN 6499 standard The standard ER collet is the most widely used clamping system in the world Made from EN-47 Alloy spring steel for spring action and fully hardened ER Standard Precision Collet with 10 microns run out Install into...- From Rs. 225.00
- From Rs. 225.00
- Unit price
- per
-
Vendor:Midland Tools
Collet ER 20
DESCRIPTION ER20 Collet follows DIN 6499 standard The standard ER collet is the most widely used clamping system in the world Made from EN-47 Alloy spring steel for spring action and fully hardened ER Standard Precision Collet with 10 microns run out Install into...- From Rs. 200.00
- From Rs. 200.00
- Unit price
- per
-
Vendor:Midland Tools
Collet ER 40
DESCRIPTION ER40 Collet follows DIN 6499 standard The standard ER collet is the most widely used clamping system in the world Made from EN-47 Alloy spring steel for spring action and fully hardened ER Standard Precision Collet with 10 microns run out Install into...- From Rs. 296.00
- From Rs. 296.00
- Unit price
- per
-
Vendor:Midland Tools
Pull Stud
Please select size and degree- From Rs. 180.00
- From Rs. 180.00
- Unit price
- per
-
Vendor:Midland Tools
Drill chuck/sleeve Arbor MT Taper
Arbor are used for drill chuck kindly choose Male Taper size as per your machine. MT 2 - JT 1 MEANS - MT2 IS MACHINE TAPER , JT1 IS KEYLESS DRILL CHUCK FEMALE TAPER JT1 IS MOSTLY USED FOR SMALL SIZE CHUCK 0-6 MM...- From Rs. 150.00
- From Rs. 150.00
- Unit price
- per
-
Vendor:Midland Tools
Keyless Drill Chuck
Specification MODEL CAPACITY TAPER D L L1 (JAWS OPENED) CODE 0-6 MM HD 0.65 MM JT1 35 61 67.5 MCT 9990 1-13 MM HD 1-13 MM JT6 48.5 97 105.5 MCT 9991 0-16 MM HD 3-16 MM JT6 53.5 101 114.2 MCT 9992 0-20...- From Rs. 1,050.00
- From Rs. 1,050.00
- Unit price
- per
-
Vendor:Midland Tools
BBT-40 Side Lock Holder
ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed...- From Rs. 2,650.00
- From Rs. 2,650.00
- Unit price
- per
-
Vendor:Midland Tools
Locking Device BT30 /BT40 /BT 50
BT30 / BT 40 / BT 50- From Rs. 1,950.00
- From Rs. 1,950.00
- Unit price
- per
-
-
Vendor:Midland Tools
Pull Stud SK-40
SK40/DIN69872 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the...- Rs. 275.00
- Rs. 275.00
- Unit price
- per
-
Vendor:Midland Tools
Pull Stud Through Coolant Hole
Enhance your machining efficiency with our Pull Stud with Through Coolant Hole. Designed for high-performance CNC machines, it ensures secure tool retention while allowing coolant to flow directly through the spindle for better cooling and chip evacuation. Crafted from durable, heat-treated steel for maximum...- From Rs. 215.00
- From Rs. 215.00
- Unit price
- per
-
Vendor:Midland Tools
BBT-40 Milling Reduction socket
Hydrogrip balanced upto 25000 rpm 20 mm inside id which can fit a 20 mm shank directly and for shorter shanks use a reduction sleeve- Rs. 2,650.00
- Rs. 2,650.00
- Unit price
- per
-
Vendor:Midland Tools
BBT-40 Stub Milling Arbour ( FM )
- From Rs. 2,450.00
- From Rs. 2,450.00
- Unit price
- per
-
Vendor:Midland Tools
BBT-40 Collet Chuck
ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher...- From Rs. 2,450.00
- From Rs. 2,450.00
- Unit price
- per
-
Vendor:Midland Tools
BT-40 MT Milling Socket / Reduction socket
- From Rs. 1,450.00
- From Rs. 1,450.00
- Unit price
- per
-
Vendor:Midland Tools
BT-40 SLN Side Lock
BT40 SLA holder also called SIDE LOCK HOLDER BT40 SIDE LOCK Is mainly used to hold Cylendrical/Straight Shank of anything like Indexable Cutter , Baby chuck , Carbide Drill whatever with straight shank can hold into for better rigidity and strength it range from 16...- From Rs. 1,350.00
- From Rs. 1,350.00
- Unit price
- per
-
Vendor:Midland Tools
Edge Finder Mechanical
Mechanical Edge Finder for Precise Machining Setups High Accuracy: Designed to quickly and accurately locate work edges, center points, and layout markings. Durable Construction: Made from high-quality steel for longevity and resistance to wear in industrial environments. Easy to Use: Simple mechanical operation that...- Rs. 350.00
- Rs. 350.00
- Unit price
- per
-
Vendor:Midland Tools
BT-40 FM Stub Milling Arbour
BT40 facemill holder also called facemill arbour and facemill adaptor BT40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters...- From Rs. 1,250.00
- From Rs. 1,250.00
- Unit price
- per
